Erasing Outside Of The Original (Non-Image Area Erase); E Rasing Outside Of The Original (Non-Image Area Erase) - Konica Minolta 7165 Instruction Manual

Erasing Outside of the Original (Non-Image Area Erase)

The Non-image area erase mode is used to copy non standard or special
originals, such as books, magazines, paste-ups, graphs, thick or thin
materials, etc. from the platen glass. The exposed glass area outside the
borders of the original will not be copied.
>>>Specifications for Non-Image Area Erase<<<
❒ Use the platen glass only. Keep RADF open throughout the procedure.
❒ Incompatible Conditions: Using RADF, 2 s 2, 2 s 1, APS, AMS, Rotation,
Rotation Sort, Rotation Group, Mixed Original, Z-Folded Original, Sheet/
Cover Insertion, Chapter, Combination, Booklet, Image Insert, Dual Page in
RADF Store mode, Reverse Image, Full-Image Area, Reduce & Shift in
Image Shift, Storing image in Overlay Memory
Set original
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely,
then press [ AUTO RESET ].
2.
Touch Non-image Area Erase on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
Please Be Reminded!
General copying
Non-Image Area Erase
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
9
Applications
Repeat
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
9-29