Demo Function - Panasonic SC-VK62D Operating Instructions Manual

CLOCK/
TIMER
, REW/ ,
, /FF
SHIFT

DEMO function

– DEMO
RQT8092
6
6
1 2 3
4 5 6
7 8 9
0 10
, DVD/CD
, , , ,
ENTER
RETURN
SETUP
5
STEP
QUICK SETUP
The QUICK SETUP screen assists you to make necessary
settings.
Turn on the television and select the appropriate video input on
the television.
1
Press [: : : : : , DVD/CD] to select "DVD/CD" as the
source.
The unit comes on.
Press [L L L L L ] when a disc is in the tray.
2
Press [SHIFT] + [SETUP] to show the QUICK
SETUP screen.
3
Follow the messages and press [8 8 8 8 8 , 9 9 9 9 9 , ; ; ; ; ;, : : : : : ] to
select, then press [ENTER] to make the settings.
Press [RETURN] to go back to the previous screen.
4
Press [ENTER] and then [SHIFT] + [SETUP] to end
the settings.
6
STEP
Setting the time
This is a 24-hour clock.
1
Press [CLOCK/TIMER] to select "CLOCK".
Every time you press the button:
PLAY REC
CLOCK
Previous display
2
(within 7 seconds or so)
g g g , REW/4 4 4 4 4 ] or [f g
Press [g
3
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
To display the time
Press [CLOCK/TIMER] once when the unit is on or at standby
mode.
The time is shown for about 5 seconds.
Note
Reset the clock regularly to maintain accuracy.
When the unit is first plugged in, a demonstration of its functions
may be shown on the display.
If the demo setting is off, you can show a demonstration by
turning on the demo.
Press and hold [–DEMO].
The display changes each time the button is held down.
DEMO OFF (off) ↔ DEMO ON (on)
You can reduce the power consumed in standby mode by
turning the demonstration off.
f f f , 3 3 3 3 3 /FF] to set the time. f