Preparing The Remote Control; Demo Function - Panasonic SC-HC3 Operating Instructions Manual

Connections (continued)
Optional antenna connections
FM outdoor antenna
FM outdoor antenna (not included)
• Never use an outdoor antenna during a lightning storm.
• You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.
• Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
• Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered
wire horizontally along a window or other convenient location.

Preparing the remote control

Place this side in before the other side
■ Batteries
• Use a manganese dry battery or an alkaline dry battery.
• Insert so the poles (+ and – ) match those in the remote control.
• Remove if the remote control is not going to be used for a long period
of time.
• Store in a cool, dark place.
• Do not heat or expose to flame.
• Do not leave the batteries in an automobile exposed to direct sunlight
for a long period of time with doors and windows closed.
• Mishandling of batteries in the remote control can cause electrolyte
leakage, which may cause a fire.

Demo function

Top View (Top Panel)
SC-HC3_GN (RQTX0293-B).indd 5
75 Ω coaxial cable
(not included)
R6/LR6, AA
DEMO
[g, –DEMO]
AM outdoor antenna
1
2
3
Remote control
signal sensor
30°30°
■ Use
• Aim at the sensor, avoiding obstacles, at a maximum range of 7 m
directly in front of the unit (Exact distance depends on angles).
• Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
When the unit is first plugged in, a demonstration of its functions may be
shown on the display.
If the demo setting is off, you can show a demonstration by selecting
"DEMO ON".
Press and hold [g, –DEMO].
The display changes each time the button is held down.
DEMO OFF
While in standby mode, select "DEMO OFF" to reduce power
consumption.
AM outdoor antenna
(not included)
DEMO ON
3/2/2009 3:40:24 PM
5