Check Character - Hand Held Products 4410, 4710 User Manual

Linear Symbologies
Character pairs /M and /N decode as a minus sign and period respectively.
Character pairs /P through /Y decode as 0 through 9.
Full ASCII On * Full ASCII Off
Code 39, continued

Check Character

No Check Character indicates that the scanner reads and transmits bar code
data with or without a check character.
When Check Character is set to Validate, But Don't Transmit , the unit will only
read Code 39 bar codes printed with a check character, but will not transmit the
check character with the scanned data.
When Check Character is set to Validate, And Transmit , the scanner will only
read Code 39 bar codes printed with a check character, and will transmit this
character at the end of the scanned data.will transmit this character at the end of
the scanned data.
* No Check Character
Validate, Validate,
But Don't Transmit And Transmit
3 - 6 IMAGETEAM™ 4410/4710 User's Guide