Preparation For Use & Lighting Instructions - Brinkmann TRAILMASTER 30" Owner's Manual

Deluxe outdoor charcoal/wood smoker & grill
Hide thumbs Also See for TRAILMASTER 30":
Table of Contents

Advertisement

Step 7
Attach the door latch to the outside of
the door as illustrated. Do not overtighten
hex nut.
Step 8
Install half air exhaust damper to inside
grill/smoker with thumb screw on outside
of grill/smoker. Use thumb screw to lock
half air exhaust vent in desired position.
Step 9
Attach front shelf and side handle to
grill/smoker.
PREPARATION FOR USE
& LIGHTING INSTRUCTIONS
PLACE THE GRILL/SMOKER OUTDOORS ON A HARD, LEVEL, NON-COMBUSTIBLE SURFACE
AWAY FROM ROOF OVERHANG OR ANY COMBUSTIBLE MATERIAL. NEVER USE ON WOODEN OR OTHER SURFACES
THAT COULD BURN. PLACE THE GRILL/SMOKER AWAY FROM OPEN WINDOWS OR DOORS TO PREVENT SMOKE FROM
ENTERING YOUR HOUSE. IN WINDY WEATHER, PLACE THE GRILL/SMOKER IN AN OUTDOOR AREA THAT IS
Prior to your first use of the Brinkmann Trailmaster, follow the instructions
below carefully to cure grill/smoker. Curing your grill/smoker will minimize rust
and damage to the exterior finish as well as rid grill/smoker of paint odor that
can impart unnatural flavors to the first meal prepared on your Trailmaster.
Step 1
Lightly coat all interior surfaces of the grill/smoker including cooking grills
and charcoal grate(s) with vegetable oil or vegetable oil spray.
Step 2
Place a charcoal grate(s) and cooking grills in cooking chamber.
Step 3
Follow the instructions below carefully to build a fire. You may use charcoal
and/or wood as fuel in the Trailmaster (see "Adding Charcoal/Wood During
Cooking" section of this manual).
5
PROTECTED FROM THE WIND.
READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY
BEFORE OPERATING YOUR GRILL/SMOKER.
Thumb screw
Front Shelf
Curing Your Grill/Smoker
Half Air
Exhaust
Damper
Side
Handle

Advertisement

Table of Contents
loading

Table of Contents