Latch Adjustment - HAMPTON BAY HI300 Owners & Installation Manual

The door latch may require adjustment as the door gasket material compresses after a few fi res. Removal of spacers will allow the latch to be moved
closer to the door frame, causing a tighter seal.
1) Remove the Latch Assembly from the unit by undoing the outer 2
bolts.
Latch
Assembly
2) Remove the Latch from the Mounting Bracket by undoing the inner
2 bolts.
Hampton HI300 Wood Cast Insert

LATCH ADJUSTMENT

Latch Assembly
removed from unit.
Mounting
Latch
Bracket
3) Remove necessary amount of spacers sitting on the Mounting
Bracket.
Ensure an equal amount of spacers are removed from both top and
bottom.
4) Re-secure Latch to Mounting Bracket using 2 bolts.
5) Re-secure the Latch Assembly to the unit using 2 bolts.
MAINTENANCE
Mounting
Bracket
Spacers
Latch Assembly re-assembled with
spacers removed.
25