Latch Adjustment - HAMPTON BAY HI1150 Owners & Installation Manual

maintenance

Latch Adjustment

The door latch or door alignment may require adjustment as the door gasket
material compresses after a few fires. Removal of spacers will allow the latch
to be moved closer to the door frame, causing a tighter seal and the ability
to raise or lower the latch assembly.
1) Raise or lower the latch by undoing the inner 2 bolts. Adjust to desired
location and retighten the 2 bolts, make sure the door catch closes freely
and makes a good seal. Do a paper test to confirm seal.
2) For Door Gasket Seal, remove the Latch Assembly from the unit by undoing
the outer 2 bolts.
Latch
Assembly
Cleaning & Maintaining Your Wood Stove
22 |
HI1150 Hampton Wood Cast Insert
Mounting
Latch
Bracket
Latch Assembly
removed from unit.
3) Remove necessary amount of spacers sitting on the Mounting Bracket.
Ensure an equal amount of spacers are removed from both top and bottom.
4) Re-secure Latch to Mounting Bracket using 2 bolts.
Latch Assembly re-assembled with
5) Re-secure the Latch Assembly to the unit using 2 bolts.
Confirm proper location of the door catch so that it closes tight, freely.
Mounting
Bracket
Spacers
spacers removed.