Assembly; Unpacking The Vacuum Cleaner; Installing The Hose - Kenmore Premalite VF6712TC Use And Care Manual

78017_Kenmore vac_EN_final
To reduce the risk of shipping damage, your vacuum cleaner is shipped
partially unassembled.

Unpacking the Vacuum Cleaner

Carefully unpack the vacuum cleaner
and make sure that you have all parts
before discarding of any packaging.
Remove any tape, cardboard inserts,
and protective film before assembly.

Installing the Hose

Your vacuum cleaner is shipped
from the factory with the hose
pre-installed. If the hose has come
loose during shipping, follow the
steps below to reinstall it.
To install the hose:
1. Press the dust bin release button and
remove the dust bin.
2. Raise the HEPA filter cover.
10/17/07 9:00 AM

ASSEMBLY

Parts packed separately from the
vacuum cleaner are:
• Wand handle
• Wand
• Crevice tool
• Dusting/upholstery tool
• Pet Handi Mate
3. From the front of
the vacuum cleaner,
insert the lower end
of the hose through
the body at the
location shown.
4. From the back of the vacuum cleaner,
feed the lower end of the hose down
and attach to the vacuum cleaner
base as shown.
5. Lower the HEPA filter cover and
reinstall the dust bin by placing it in
the holder, then tilting it forward until it
clicks into place. Make sure the dust
bin is properly seated and the cord
wrap frame (hanger) is fully engaged
in the dust bin handle.
6
Page 6
™