Adjusting The Nozzle Height - Kenmore Premalite VF6712TC Use And Care Manual

78017_Kenmore vac_EN_final

Adjusting the Nozzle Height

To adjust the nozzle height:
Press the right foot pedal to adjust the
Carpet
pile height. Each press of the pedal will
Floor
step the nozzle height through extra
low, low, medium, and high. The right
Carpet
ON
Floor
side LED indicators will light to confirm
OFF
Hi
Carpet
each position.
ON
Med
Floor
Lo
OFF
Hi Suggested pile height settings:
t
ON
Med
Lo
OFF You may need to raise the height to
make some jobs easier, such as
vacuuming scatter rugs and longer
pile rugs.
POWER
Recommended settings:
POWER
Extra Low: very low pile, bare
floors
POWER
HEIGHT ADJUSTMENT
Low: short to medium pile
Medium: medium to long pile
HEIGHT ADJUSTMENT
High: shag carpet, long pile,
HEIGHT ADJUSTMENT
scatter rugs
IGHT ADJUSTMENT
Attention: Special care is required
when vacuuming certain types of carpet
or flooring. Always check the carpet
or floor covering manufacturer's
recommended cleaning instructions
before vacuuming.
10/17/07
Hi
ON
Med
Lo
OFF
Hi
Med
Lo
POWER
9:00 AM Page 10
OPERATION
10
Hi
Carpet
ON
Med
Floor
Lo
OFF
POWER
HEIGHT ADJUSTMENT