Maintenance - Panasonic SC-PM5DB Operating Instructions Manual

■ USB
The USB drive or its
contents cannot be read.
Slow operation of the
USB device.
■ Unit displays
"NO PLAY"
"USB OVER CURRENT
ERROR"
"F76"
"ERROR"
"VBR–"
"– –:– –" (during standby
mode)
"MP3 ERROR" or
"PLAYERROR"
"UNSUPPORT"

Maintenance

If the surfaces are dirty If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that came with the cloth carefully.
• The USB drive format or its contents is/are not compatible with the
system, "NO PLAY" is displayed. Unplug the USB device and insert it
again.
• The USB host function of this product may not work with some USB
devices.
• USB devices with storage capacity of more than 8 gigabytes may not
work in some instances.
• Large fi le size numerous fi les or high memory USB fl ash drive takes
longer time to read.
• Check the content.
• Only MP3 format fi les can be played.
• The USB mass storage device rating exceeds 500mA. Disconnect
the USB device. Turn the unit off and then back on.
• There is a power supply problem. Consult the dealer.
• Incorrect operation performed. Read the instructions and try again.
• The unit cannot display the remaining play time for variable bit rate
(VBR) tracks.
• You plugged the AC mains lead in for the fi rst time or there was a
power failure recently.
• Set the time.
• You have played an unsupported format.
Check the contents.
• You have inserted an unsupported device.
16
—
—
—
—
—
—
—
—
—
—
15
10
—
19