Using The User Button - Panasonic HDC-Z10000 Operating Instructions Manual

Using the USER button

To use the set USER button, press USER1 to USER3 button or touch the USER4 to USER7
button icon displayed when you touch the LCD monitor.
(When you use the USER1 to USER3)
USER1
≥ To cancell, press the USER button or touch the USER button icon again.
For cancelling or using of the following functions for the USER buttons, refer to each page.
j Push AF (l 62)
j Black Fade (l 63)
j White Fade (l 63)
j Digital Zoom (l 64)
j Playback parallax adjustment (l 64)
∫ Switch display/not-display of the USER buttons
Display/not-display of the USER button icons in the LCD monitor can be switched.
MENU
: [SW & DISP SETUP] # [USER BUTTON DISPLAY] # [ON] or [OFF]
∫ Check the setting of the USER buttons
To check the settings of the USER buttons
(USER1 to USER3) in the recording screen,
press and hold on the DISP/MODE CHK
button.
USER2 USER3
(When you use the USER4 to USER7)
(In Recording Mode)
USER4 ATW
Conv.R
USER5
3D
USER6
REC.C
USER7
(In Playback Mode)
ATW
USER4
Conv.R
USER5
3D
USER6
REC.C
USER7
j 3D Display (l 65)
j Recording Check (l 66)
j Last Scene Delete (l 67)
j 3D video output selection (l 67)
- 61 -
SCN1 SCN2 SCN3 SCN4 SCN5 SCN6
DISP/MODE CHK