Table of Contents
Advertisement
Recording
USER button
Each of the USER button can register one function from the 18 available functions.
≥ There are three USER buttons (USER1 to USER3) on the main body and four USER
button icons (USER4 to USER7) displayed on the LCD monitor.
Setting the USER button
1
Select the menu.
MENU
: [SW & DISP SETUP] # [USER BUTTON SETUP]
2
Touch the USER button you wish to set.
≥ The USER button number and currently set function name are displayed. (For example, a
display of 1. [FA] means that Focus Assist has been assigned to USER1 button.)
3
Touch the item to register.
≥ For the functions of the USER button that can be registered, refer to page 62.
≥ Touch [INH] (Inhibit) if not registering.
≥ Next (Previous) page can be displayed by touching
≥ To continuously set other USER buttons, repeat steps 2-3.
4
Touch [EXIT] to complete the setting.
≥ There are some functions that cannot be used depending on the position of the mode
switch. (l 62)
≥ Setting will be common for the recording mode and the playback mode.
A USER1 button
B USER2 button
C USER3 button
D USER4 button
E USER5 button
F USER6 button
G USER7 button
/
.
- 60 -
Advertisement
Table of Contents
