Swann SW242-D8U User Manual page 8

8) " " :
Press " " button to pause playing files.
9) " " :
Press " " button to stop playing files.
10) " " :
Under the playback mode, press "
11) " " :
Under the playback mode, press "
12) "ZOOM" :
Press "ZOOM" button to enlarge the picture of the selected channel (2X digital
zoom).
13) "PLAY" :
Press "PLAY" button to play the recorded files.
◄►
14) "▲▼ " :
◄►
Press "▲▼
15) "SHIFT" + "SEQ" :
Press "SHIFT" + "SEQ" to activate the call monitor function and press "SEQ" to
escape the call monitor mode.
16) "SHIFT" + "AUDIO" :
Press "SHIFT" + "AUDIO" to select live or playback sounds of the 4 audio
channels.
17) "SHIFT" + "SLOW" :
Under the playback mode, press "SHIFT" + "SLOW" to show slow playback.
18) "SHIFT" + "CH－ " or "CH＋" :
Press "SHIFT" + "CH－ " or "CH＋" to change the setting in the menu / to select
the channel.
19) "SHIFT" + "SET" :
Press "SHIFT" + "SET" to change the position of the channel display.
◄►
Press "▲▼
Press "＋" or "－" to select the channel you would like to show.
Press "ENTER" button to confirm.
20) "SHIFT" + "SEARCH" :
Press "SHIFT" + "SEARCH" buttons to enter the search mode.
21) " " + "
Press "
mode.
◄ ►
22) " " or " " + "POWER"
Press and hold "
system. Please see "5.4 SWITCHING THE N/P SYSTEM" at P.30.
" to move the cursor up / down / left / right.
" to select the channel you would like to change.
" :
" + " " buttons at the same time to enter / exit the PTZ control
◄ ►
" or " ", and press "POWER" to switch to NTSC or PAL
" button to fast rewind.
" to fast forward.
5