Swann SW242-D8U User Manual page 55

Swann dvr
Table of Contents

Advertisement

4CH / 4CH (D)
Solder Side of DSUB 15 PIN
8 7 6 5 4 3 2 1
15 14 13 12 11 10 9
16
PIN
FUNCTION
1
RS232-TX
2
RS232-RX
3~6
ALARM INPUT
7
EXTERNAL
ALARM NC
8
EXTERNAL
ALARM NO.
9
GND
10
RS485-B
11
RS485-A
12~13
PIN OFF
14
ALARM RESET
15
EXTERNAL
ALARM COM
16~17
GND
17
DESCRIPTION
DVR can be controlled remotely by the keyboard of PC by using RS-232 serial
communication signals.
DVR can be controlled remotely by the keyboard of PC by using RS-232 serial
communication signals.
To connect the wire from ALARM INPUT ( PIN 3 -- 6 ) to GND ( PIN 9 )
connector, DVR will start recording and the buzzer will be on.
When "MENU -> DETECTION -> DETECTION SETUP -> ALARM" is set to
"Low" : When the alarm input signal is " Low ", the unit starts to record and
buzzer.
When "MENU -> DETECTION -> DETECTION SETUP -> ALARM" is set to
"High" : When the alarm input signal is " High ", the unit starts to record and
buzzer.
Under the normal operation, COM connects with NC and disconnects from NO.
But when any alarm is triggered, COM disconnects with NC and connects with
NO.
Attention: The voltage restriction is under DC24V 1A.
Under the normal operation, COM disconnects with NO. But when any alarm is
triggered, COM connects with NO.
Attention: The voltage restriction is under DC24V 1A.
Signal GND.
DVR can be controlled remotely by the keyboard of PC by using RS-485 serial
communication signals.
DVR can be controlled remotely by the keyboard of PC by using RS-485 serial
communication signals.
Connecting the wire from ALARM RESET (PIN 14) to GND (PIN 9) connector
will disable alarms. An external signal to ALARM RESET (PIN 14) can be used
to reset both ALARM OUTPUT signal and DVR's internal buzzer. When any
alarm has been triggered, the signal becomes "Low", and all alarm activities will
be stopped. Under the normal operation, the signal remains "High".
Under the normal operation, COM disconnects with NO. But when any alarm is
triggered, COM connects with NO.
Attention: The voltage restriction is under DC24V 1A.
Earth GND
52

Advertisement

Table of Contents
loading

Table of Contents