Table of Contents
Advertisement
4CH
Carefully follow the steps to ensure correct installation.
*** Note: Please set one HDD to "Master Mode" or "Single Mode" ***
•
Step 1 Connect the connector with the HDD (Pic. 1).
•
Step 1
•
Step 2 Put HDD into the HDD cartridge with the pins facing outside (Pic. 2).
•
Step 2
•
Step 3 Fasten the HDD to the cartridge. Before you fasten the HDD, please be aware
•
Step 3
that you must to align the pins of the HDD with the pin marks of the cartridge. Then
fasten the HDD correctly (Pic. 3 & 4). You must precisely align the hard disk to the pin
connection to ensure correct installation.
•
Step 4 Reverse the HDD and put it into DVR (Pic. 5, 6 & 7).
•
Step 4
•
Step 5 Lock the HDD slot by turning the key clockwise (Pic. 8).
•
Step 5
Note : If you do not lock the HDD slot, the DVR system will not function properly.
•
Step 6 Close the cap (Pic. 9).
•
Step 6
A ( locked )
B ( unlocked )
50
Advertisement
Table of Contents
