Swann SW242-D8U User Manual page 10

8) "ZOOM " :
Press "ZOOM" button to enlarge the picture of the selected channel (2X digital
zoom).
9) " " / " － " :
Press " " button to show the 4 channel display mode.
Press " － " button to change the setting in the menu.
10) "SEQ" / " ＋ " :
Press "SEQ" button to activate the call monitor function and press "SEQ" button
again to escape the call monitor mode.
Press "＋ " button to change the setting in the menu.
11) "POWER" :
Press this button to turn on / turn off the DVR.
(Under the recording mode, please stop recording before turning off the DVR).
12) "CH1 " "CH2 " "CH3 " "CH4 " :
Press the button "1", "2", "3" or "4" to select the desired channel.
13) "REC" :
Press "REC" button to activate the manual recording.
14) "PLAY" :
Press "PLAY" button to playback the recorded files.
15) "
UP / PAUSE , DOWN / STOP, LEFT / FAST REWIND, RIGHT / FAST FORWARD
◄►
Press "▲▼
Under the playback mode, press "
Under the playback mode, press "
Under the playback mode, press "
Under the playback mode, press "
16) " " :
Press these two buttons to select live or playback sounds of the 4 audio channels.
17) " " :
Press these two buttons at the same time to enter / exit the PTZ control mode.
◄ ►
18) " " or " " + "POWER"
Press and hold "
Please see "5.4 SWITCHING THE N/P SYSTEM" at P.30.
" to move the cursor up / down / left / right.
◄ ►
" or " ", and press "POWER" to switch to NTSC or PAL system.
" button to pause playback.
" button to stop playback.
" button to fast rewind.
" button to fast forward.
7
" :