JVC VR-609 Instructions Manual page 57

■ How to Setup
1) Move the cursor using the up/down/left/right buttons or Jog.
Jog
2) Area field setup is moved to the place by jogging and can check the field by using
ENTER button.
3) After setup is finished, press the EXIT button to move to Alarm Recording menu.
■ Sensitivity
Sensitivity refers to the sensitivity of detecting motion. Sensing Speed is the speed of
motion. Possible to set-up a range from 1 to 10. (1=Low/Slow, 10=High/Fast.)
Motion must be pushed on Recording Events. After detecting motion by Motion Area,
Sensitivity and Sensing Speed, recording is started.
How to Setup
ⓐ Move to Sensitivity or Sensing Speed using Jog then press the enter button to
setup value. The detection areas are displayed green, and its color changes to
orange when detects motion.
ⓑ After setup is finished, move to Alarm Recording menu by pressing EXIT or ENTER
button.
・The bigger value of Sensitivity is, the more sensitive the detection is.
!
・Sensing Speed is no reaction to fast changing because
renewal speed is slow down as increasing Sensing Speed value.
・If a setup is completed, please be sure to check real operation.
・When an area setting screen is opened during recording, even if there is no
motion in an image. Although the detection log may be recorded, the Motion-
Detection Recording does not work.
left/right buttons
-- 57 --
up/down buttons
VR-609