JVC VR-609 Instructions Manual page 80

・When the users other than an administrator are registered, the "User" section is
displayed on a password certification window. Please choose a user in the following
procedure and input a password.
1) Press the EXIT button, the up button, and the ENTER button in order, and move to the
"User" section.
2) Choose the user with vertical buttons, and press the ENTER button.
3) Press the down button and the ENTER button in order, and move to the "Password"
section, and input a password.
・This message is displayed when press the "MENU" button after setting
password.
・Enter the Password.
・ If you input wrong password, you can not enter the MENU.
If you input wrong password 3 times, MENU screen will disappear.
Press the MENU button to input password again.
・It is displayed when set-up Admin Password for the first time.
It shows for one time when set-up password after initializing system.
・It is important to remember the Master Password and write down in a secure place.
・If you operate quickly, possible to miss Master Password. Please be careful.
・Enter Master Password on Password.
・As use Master Password, possible to enter to the menu.
!
When you have forgotten both the password and the master password, please consult
your nearest JVC dealer.
・It is displayed if there is
no User ID.
-- 80 --
・It is displayed if there are User
IDs. Input the password after
selecting the user name.
VR-609