JVC VR-609 Instructions Manual page 77

■ How to Setup
1) Move to the place you want to change the setup by using Jog.
2) Select contents to change by using the ENTER button.
3) Select place to change by using the right/left button.
4) Select the number you want by using Jog.
IP Address : ______.______.______.______
Subnet Mask : ______.______.______.______
Gateway : ______.______.______.______
DNS : ______.______.______.______
Web Server Port Number : ____
5) If you press the "Apply" button, "To apply, change network configuration.
Then restart the system." will be displayed. If presses a "Restart Now!"
button here, it will reboot and a setup will be changed.
・If Port Number is set-up besides 80, please input the port number into the
!
address input section of a web browser.
ex) http://192.168.0.1:81/
・In case of using client program, the port number should be set-up at the
client program.
・Possible to have a Network problem when its installation. To avoid this
problem consult the network manager for setup values.
-- 77 --
VR-609