Compu Link Bemote Control System - JVC RX-206BK Instructions Manual

Compu Link Remote Control System
The RX-207TN/RX-2068K has COMPU LINK-1 SYNCHRO
terminals and the RX-307TN/RX-306BK has COMPU LINK-3
SYNCHRO terminals. JVC's exclusive Comou Link Remote
Control System connects equipment with JVC COMPU LINK-1
or COMPU LINK-3 SYNCHRO terminals to the remote control
system. You can control equipment from the remote control
unit, or you can use other functions such as automatic source
selection and synchronized recording.
Equlpment remote control
By connecting the COMPU LINK-1 or COMPU LINK-3
SYNCHRO terminal to the receiver, the equipment that does
not have REMOTE SENSOR in its main unit can be remote
controlled via REMOTE SENSOR of the receiver.
Automatlc aource aetectlon
Pressing SOURCE SELECT keys will automatically put the cor-
responding source equipment into the PLAY mode. When you
press the PLAY key on source equipment, the corresponding
Source Select key is automatically set to that source. Other
source equipment shuts down about 5 seconds later.
Note: Automatic source selection does not function on a tape
deck connected to the TAPE2/VIDEO SOUND terminals.
This is applicable only with components that are compatible
with JVC's Compu Link Remote Control System.
Synchronlzad recordlng
With synchronized recording, a tape deck can start recording
automatically with a CD player or turntable.
Note: Read your tape deck manual for maore information on
synchronized recordi ng.
This is applicable only with components that are compatible
with JVC's Comou Link Remote Control Svstem.
CD auto-changer wlth COHPU LtNK-g SYNCTIBO
tetmlnal
You can turn on/off the CD auto-changer along with the
RX-307TNiRX-3068K by connecting the COMPU LINK-3
SYNCHRO terminal of the CD auto-changer to the
RX-307TN/RX-306BK. For details, refer to the CD Auto-
Changer Instructions.
How to Connect Compu Link
This diagram shows how Compu Link compatible components
are connected to the COMPU LINK-1 or COMPU LINK-3
SYNCHRO terminals.
CD Player
Tape Deck
Important! Do not connect the remote cable when connect-
ing the JVC cassette deck having COMPU LINK-I/SYNCHRO
terminals to the TAPE 2/VIDEO SOUND terminals,
Page 4