JVC RX-206BK Instructions Manual page 11

Using Auto-Memory
Auto-Memory
The Auto-Memory function lets you scan a serres of radio
stations, and preset the ones you want into the receiver's
memory. The receiver will scan radio frequencies and preset
the stations, as they are tuned, with ascending channel
numbers.
(O Turn the receiver on.
@ Press the AM or the FM Source Select button.
G) Use the TUNING key to find the lowest frequency you want to
start scanning from.
@ Press the AUTO MEMORY button.
The MEMORY indicator lights and - - CH appears (- -
blinks) in the Tuner Display Window for about five seconds.
@ Using the Numeric keys, enter the lowest channel number
(1 to 40) you want to assign a preset.
lmportant! You must enter the channel number while the
MEMORY indicator is lighted. lf the indicator turns off too
soon, press the AUTO MEMORY button and start again.
When a radio station is tuned in, scanning stops. The TUNED
indicator lights, and the first preset channel number and the
frequency of the station tuned in are displayed alternately for
about five seconds. When this station is preset, scanning
starts again.
@ lf you do not want to preset that station, press the AUTO
MEMORY button while the channel number and frequency
are displayed alternately. The receiver will start scanning
again.
This process continues automatically until all 40 channels are
filled or the upper frequency limit is reached.
Uslng Numerlc Keys
Preset stations are set into the receiver's memory and recalled
using the Numeric keys.
To indicate numbers 1 to 10, press the appropriate key. To
indicate numbers 11 to 40, you need to use the + 10 key and
one other key. See the following examples:
To indicate 17: press the +10 key, then the 7 key.
To indicate 20: press the +10 key, then the 10 key.
To indicate 25: press the +10 key twice, then the 5 key.
To indicate 40: press the + 10 key three times, then the 10 key.
P a g e 1 1