JVC RX-206BK Instructions Manual page 9

I
I
I
Basic Operation
O To turn on your receiver, press the POWER switch on.
The Tuner Display Window lights up.
The Source indicator Lights show the source that was last
played.
JVE
[J "o
Q) Select the speaker system you want by
SPEAKERS 1 switch, the SpEAKERS 2
switches.
Note: lf just one pair of speakers is connected to the receiver
and you press both SPEAKERS switches, no sound will be
heard.
O tt you want to listen through headphones, plug them in to the
Headphones Jack.
Note: lf you do not want sound coming through the speakers,
press both SPEAKERS switches off.
@ Press one of the Source Select buttons to choose the stereo
source you want to listen to.
The corresponding Source Indicator Light shows which stereo
source is being played.
Note: Operate the stereo sources (for example: CD, phono,
tape deck) by following the appropriate instruction manuals.
() Turn the VOLUME control to adjust the volume.
Impoftant! Listening to an ertremely loud sound may cause
a hearing defect. Adjust the volume properly. Especialty when
using headphones, avoid listening to an ertremely loud
sound.
@ turn the BALANCE control left or right to set the balance
between the left and right speakers.
@ Turn the TREBLE control left or right to decrease or Increase
treble (high frequency) sound level.
@ Turn the BASS control left or right to decrease or increase
bass (low frequency) sound level.
E
pressing the
switch, or both
Page 9