If The Cd-Rom Drive Has A Problem - HP VECTRA XW User Manual

No Sound from the
CD-ROM Drive
CD-ROM Drive is Idle
WARNING

If the CD-ROM Drive Has a Problem

Check that the software is correctly installed and the system correctly
configured before removing your computer's cover to check the CD-
ROM cable connections and jumper settings.
If you are having problems with sound when playing a CD:
Check that the volume control (if present) on the CD-ROM drive
•
front panel is not set to the minimum.
Ensure that the disk in the CD-ROM drive is an audio disk and not a
•
Photo CD or data CD.
If using headphones or external speakers, check that they are
•
properly connected (see chapter 1).
Check that the CD audio cable is correctly installed and is connected
•
to the system board.
If the CD-ROM drive does not appear to be working, try accessing the
disk by clicking on the CD-ROM drive icon or drive letter assigned to the
CD-ROM drive by your operating system.
Be sure to disconnect the power cord and any telecommunication
cables from your computer before you remove the cover to check the
cable connections or jumper settings.
To avoid electric shock and harm to your eyes by laser light, do not
open the CD-ROM drive enclosure. The CD-ROM drive should be
serviced by qualified service personnel only. Do not attempt to make
any adjustment of the unit. This PC Workstation is a class I laser
product.
Refer to the label on the CD-ROM drive for power requirements and
wavelength.
3 Troubleshooting Your PC Workstation and Using the Setup Program
If the CD-ROM Drive Has a Problem
English 71