If Your Pc Workstation Has A Software Problem; If You Have Forgotten Your Password - HP VECTRA XW User Manual

If Your PC Workstation Has a Software Problem

If You Have Forgotten Your Password

If you forget the User Password and the System Administrator
Password is set and known:
1 Restart the PC Workstation. If the keyboard is locked, unplug the
power cord and plug it in again.
2 Wait for the message
3 Press to start Setup.
4 Type the System Administrator Password to enter Setup.
5 Highlight the
User Password
6 Press to save the new User Password and exit Setup.
If you forget both the User Password and the System Administrator
Password:
1 Switch off the PC Workstation and remove the computer's cover
(refer to chapter 2).
2 Set switch 2 (PSWRD) on the system board switch block to ON
(refer to chapter 4 for the switch location).
3 Replace the PC Workstation's cover and switch it on. Allow it to
complete its startup routine.
4 Switch off the PC Workstation and remove the cover.
5 Reset switch 2 (PSWRD) to OFF.
6 Replace the computer's cover (refer to chapter 2).
7 Switch on the PC Workstation and allow it to complete its startup
routine.
8 Press when prompted to use Setup.
9 Set new User and System Administrator Passwords.
10 Press to save the new passwords and exit Setup.
3 Troubleshooting Your PC Workstation and Using the Setup Program
If Your PC Workstation Has a Software Problem
<F2=Setup>
field and set a new User Password.
.
English 67