Deploying FCoE (FIP Snooping) on Dell Force 10 MXL
Figure 38.
Multiple port uplink (LAG) MXL configuration (can be copied and pasted) - continued
interface Port-channel 5
no ip address
mtu 2500
portmode hybrid
switchport
fip-snooping port-mode fcf
no shutdown
interface Vlan 20
mtu 2500
!untagged TenGigabitEthernet 0/1-3
!untagged Port-channel 5
interface Vlan 1000
no ip address
mtu 2500
tagged TenGigabitEthernet 0/1-3
tagged Port-channel 5
fip-snooping enable
no shutdown
service-class dynamic dot1p
feature fip-snooping
fip-snooping enable
protocol lldp
NOTE: The commands should be entered in the order from the previous flowchart. The
running-config which is partially displayed in this figure shows were the entries occur but
not the proper order.
NOTE: The commands are in a different order for a multiple-link (port-channel/LAG)
configuration. If the ports to be added to the port-channel have current settings
configured including "portmode hybrid" and "switchport" these settings will need to be
removed. If they are not removed the configuration settings will not be successful.
43