Deploying FCoE (FIP Snooping) on Dell Force 10 MXL
This is what the downlink (server facing port) additional settings should look like.
These additional command line
"dcbx version
CEE" will configure the port to only use the CEE version
of DCBX and not negotiate other values. This setting is currently necessary for the Intel x520 CNA for
use with FCoE and applicable storage.
Figure 14.
M1000e Chassis Management Controller -> Server Overview -> Properties -> WWN/MAC
information for Blade Server 3's "B" fabric CNA port 2 (B2).
22