Figure 37. Multiple Port Uplink (Lag) Mxl Configuration (Can Be Copied And Pasted) - Dell Force10 MXL Deployment Manual

Deploying fcoe (fip snooping)
Hide thumbs Also See for Force10 MXL:
Table of Contents

Advertisement

Deploying FCoE (FIP Snooping) on Dell Force 10 MXL
Command-Line Interface Method
Figure 37.
Multiple port uplink (LAG) MXL configuration (can be copied and pasted)
configure
default vlan-id 20
interface TenGigabitEthernet 0/1
no ip address
mtu 2500
portmode hybrid
switchport
protocol lldp
dcbx port-role auto-downstream
spanning-tree pvst edge-port
no shutdown
exit
interface TenGigabitEthernet 0/2
no ip address
mtu 2500
portmode hybrid
switchport
protocol lldp
dcbx port-role auto-downstream
spanning-tree pvst edge-port
no shutdown
exit
interface TenGigabitEthernet 0/51
no ip address
mtu 2500
port-channel-protocol LACP
port-channel 5 mode active
protocol lldp
no advertise dcbx-tlv ets-reco
dcbx port-role auto-upstream
no shutdown
exit
interface TenGigabitEthernet 0/52
no ip address
mtu 2500
port-channel-protocol LACP
port-channel 5 mode active
protocol lldp
no advertise dcbx-tlv ets-reco
dcbx port-role auto-upstream
no shutdown
exit
42

Advertisement

Table of Contents
loading

This manual is also suitable for:

Force10 mxl 10 gbe

Table of Contents