Table of Contents
Advertisement
Operation
Headset operation
Power on/off the headset
Power on the headset before use.
To power on the headset:
•
Place the headset in the headset base.
-OR-
•
Press and hold
The
light flashes blue three times and you hear three beeps
when it is being powered on.
Power off the headset if it will not be used for a long time.
To power off the headset:
•
Press and hold
The
light flashes red three times and you hear three beeps
when it is being powered off.
Prolonged exposure to high volume levels using the headset may damage
your hearing.
PHONE mode and PC mode
Before using the headset, you may change its default mode to
PHONE mode or PC mode. When you press
while it is not in use, your headset automatically uses the default
mode you selected. When the headset is not in use, you can
choose between PHONE mode and PC mode.
To choose PHONE mode:
•
Press the PHONE button on the headset base. The PHONE
light turns on.
To choose PC mode:
•
Press the PC button on the headset base. The PC light turns on.
for two seconds.
for four seconds.
26
on the headset
Advertisement
Table of Contents
