Copying Overview; Checking The Copy Paper Size And Selecting The Paper Source - Minolta EP1052 Manual

24

1. Copying Overview

Place the original in position (step 1), set the number of copies to be made (step
7), and press the Start Key (step 8). This will allow you to make a full-size
copy or copies on paper of the same size as the original.
The control panel selection (
ratio and the image density.
To change the Zoom
Ratio
) you make will change the magnification
1.Placing the Original
Raise the Original Cover and place the
original face down on the Original Glass.
p. 26
2. Checking the Copy Paper Size and
Selecting the Paper Source
Check whether the desired
paper size is loaded into the
Drawer or not.
YES: Go step 3 or step 7.
NO: Load the desired paper size or make a copy
using a Manual Bypass Tray.
Add Paper Indicator
Manual Bypass Copying
3. Selecting the Zoom Ratio
Select the desired fixed
zoom ratio.
p. 31
100%
1142O105CA
1151O013AA
Paper
p. 28
p. 64
p. 40
Set the zoom ratio.
p. 32
50%~200%
A4
1142O138DA
1142O034AA