Section 6: Basic Operations; How To Make A Basic Copy; The Basic Screen - Konica Minolta Di5510 User Manual

Basic Operations

How to Make a Basic Copy

The Basic Screen

When power is turned on, the Basic Screen displays after warm-up, when Energy saver
mode is activated, when ECM password is set, when Key counter is used, or when Panel
Reset mode is manually or automatically restored. All copying selections can be initiated
from the Basic Screen, whether selected with screen keys or conventional keys, such as
Program Memory.
When the Electronic Copy Monitor (ECM) is activated, a valid 8-digit ECM password,
assigned by the Key Operator, must be entered before copying can be performed. See p.
5-4.
All of the initial settings in the Basic Screen, except Print Quantity, can be changed by the
Key Operator in the Initial Setting Menu Screen.
Basic Screen
Messages and
Copier Status
Folder keys
Output icon
Notice message
Output Mode keys
NOTE: The original count displayed in the center of the message area counts the original pages placed in the
EDH as they are scanned. A duplex original as well as a simplex original count as 1.
When scanning from the platen glass, the counter increases by 1 for every image scanned.
The popup menu appears on the Basic Screen to select the basic copying conditions.
NOTE: During the process of successive copying jobs, the message "Warming up" may be displayed in the
message area of the Basic Screen to maintain the copy image quality.
6-2
Master/ Sub/ HDD/ Original direction/ Rotation icon
Basic Mode keys
Reserve job count Original count
Status key
Count/Set
indicator
Special Original
key
Application key
Rotation Off key
Store key
Memory indicator