Making Copies On Paper Loaded Into The 1St Drawer (Multipurpose Paper Drawer) - Konica Minolta 7915 Instruction Manual

Basic Operations
6.3 Making Copies on Paper Loaded into the 1st Draw-
er (Multipurpose Paper Drawer)
When making continuous copies onto special paper, such as overhead
projector transparencies, postcards or thick paper, whether a standard or
non-standard size, load the paper into the 1st drawer (the multipurpose
paper drawer).
Sizes and types of paper that can be used:
G
Automatically detected paper sizes:
A6L, B6L, A5L, A5C, B5L, B5C, A4L, A4C, A3L, FLS L, 4 × 6, A3Wide
(311 mm × 457 mm)
G
Manually set paper sizes:
5-1/2 × 8-1/2L, 5-1/2 × 8-1/2C, ExecutiveL, ExecutiveC, LetterL, Let-
terC, LegalL, 11 × 14L, 11 × 17L, B4L, A6 Card
Refer to the section "To set the "1st Drawer Paper Select" parameter"
on page 8-18 for more details.
G
Selectable paper sizes
Width: 90 to 311 mm
Length: 140 to 457 mm
Refer to the section "To set the "1st Drawer Paper Select" parameter"
on page 8-18 for more details.
G
Paper types:
Standard paper (thickness: 64 to 90 g/m
Thick paper 1 (thickness: 91 to 163 g/m
Overhead projector transparencies
Second side of a double-sided copy on standard paper
Second side of a double-sided copy on thick paper 1
Konica 7915/7920
2
)
2
)
6
6-5