When The Inspection Mark " " Appears - Konica Minolta 7915 Instruction Manual

Touch Panel Messages
10.6

When the Inspection Mark " " Appears

When the inspection mark (
appears, the image stabilization, printing and scanning functions of the
copier have become unstable.
Note
Touching the inspection mark (
plays a screen like that shown below.
When contacting the technical representative, inform them of the num-
bers ("P-7" in the example below) listed in the screen that appears.
Touching [Exit] in the top-right corner displays the Basic screen.
Konica 7915/7920
) in the lower-left corner of the touch panel
) that appears in the touch panel dis-
10
10-41