Emergency Power Off; Electrical Supply; Disconnect Device - Xerox 770 Safety Manual

Safety information
• Do not place objects on the power cord.
• Do not override or disable electrical or mechanical interlocks.
• Do not obstruct the ventilation openings. These openings prevent overheating of the
machine.
• Never push objects of any kind into slots or openings on this equipment. Making a
contact with a voltage point or shorting out a part may result in fire or electrical
shock.

Emergency power off

If any of the following conditions occur, immediately switch off the power to the machine
and disconnect the power cord from the electrical outlet. Call an authorized Xerox service
representative to correct the problem.
• The machine emits unusual noises or odors.
• The power cord is damaged or frayed.
• A wall panel circuit breaker, fuse, or other safety device is tripped.
• Liquid is spilled into the machine.
• The machine is exposed to water.
• Any part of the machine is damaged.

Electrical supply

This product shall be operated from the type of electrical supply indicated on the
product s data plate label. If you are not sure that your electrical supply meets the
requirements, please consult a licensed electrician for advice.
WARNING
This equipment must be connected to a protective earth circuit. This equipment is
supplied with a plug that has a protective earth pin. This plug will only fit into an
earthed electrical outlet. This is a safety feature. If you are unable to insert the plug
into the outlet, contact a licensed electrician to replace the outlet.
CAUTION
Always connect equipment to a correctly grounded power outlet. If in doubt, have
the outlet checked by a qualified electrician.

Disconnect device

The power cable is the disconnect device for this equipment. To remove all electrical
power from the machine, disconnect the power cable from the electrical outlet.
2-2 ®
Xerox 770 Digital Color Press
Safety Guide