Stapling Output Copies (Staple) - Konica Minolta KM-7145 Instruction Manual

Stapling Output Copies (Staple)

The FS-112/FS-113/FS-114 finisher provides the ability to staple.
Staple mode staples each sorted set. Up to 50 sheets (or a stack up to 5 mm thick) can
be stapled.
FS-112 Finisher
Specifications for Staple Mode
❒ Staple mode cannot offset the finished sets, or cannot be used with Group mode.
❒ Using excessively curled paper or some types of thin paper in Staple mode may
cause poor results in arrangement of the stapled sets.
❒ Incompatible with Staple mode: Using platen glass (unless Image Insert, Dual
Page, or Platen store mode is used), Booklet, OHP Interleave, Non-Image Area
Erase, Repeat, AUTO Layout
3-38
FS-113 Finisher
FS-114 Finisher
FS-114 Finisher
+ SK-114 Saddle kit