1.1 Improving Color Copy Quality ("Color Image Adjust" Function)
The following adjustments are made only for CMYK images, such as photographs.
To adjust the "Color Balance" parameter
This parameter can be used to adjust the balance in the concentration
of cyan (C), magenta (M), yellow (Y) and black (BK). Each color can be
adjusted to a level within a range of 0% to 200% (in 1% increments).
To increase the red tinge
G
Increasing the amount of yellow and magenta
G
Decreasing the amount of cyan
To increase the green tinge
G
Increasing the amount of yellow and cyan
G
Decreasing the amount of magenta
To increase the blue tinge
G
Increasing the amount of magenta and cyan
G
Decreasing the amount of yellow
To increase the yellow tinge
G
Increasing the amount of yellow
G
Decreasing the amount of magenta and cyan
To increase the black tinge
G
Increasing the amount of black
1
In the Color Adjustments screen, touch [Color Balance].
2
Select the color that you
wish to adjust, and then
touch
and
to specify the desired
setting.
3
After specifying the
settings, touch [Enter].
Konica 8020/8031
1
1-9