Zone Ii Remote Control Functions - Harman Kardon AVR 7500 Owner's Manual

Zone II Remote Control Functions

POWER
MUTE
A
OFF
VID 2
AVR VID 1
B
AM/ / FM VID 3 VID 4
C
DVD
CD TAPE
D
DN TUNING UP
E
F
DN
PRESET UP
G
H
DISC SKIP
DISC SKIP
I
VOLUME
Power Off
AVR Selector
AM/FM Tuner Select
Input Selectors
Tuning Up/Down – Fast Play
Record/Pause
Preset/Track Skip
Disc Skip
Volume Up/Down
Play Forward/Reverse/Stop
Mute
14 ZONE II REMOTE CONTROL FUNCTIONS
The Zone II remote may be used in either the
same room where the AVR 7500 is located, or it
may be used in a separate room with an option-
K
al infrared sensor that is connected to the
AVR 7500's Multi IR input jack
Power Off: When used in the room where
the AVR 7500 is located, press this button to
place the unit in Standby. When it is used in a
remote room with a sensor that is connected to
the Multi IR jack , this button turns the
Multi-Room system off.
AVR Selector: Press this button to turn on
J
the AVR. The input in use when the unit was last
on will be selected.
AM/FM Tuner Select: Press this button to
select the Tuner as the input to the Multiroom
system. Press it again to change between the
AM and FM bands.
Input Selectors: When the AVR is off,
press one of these buttons to turn the unit on
and to select a specific input. When the unit is
already in use, pressing one of these buttons will
change the input.
Tuning Up/Down – Fast Play: These but-
tons may be used to change the frequency of
the tuner. These buttons may also control the
Fast Play or Fast Reverse functions of compatible
Harman Kardon CD, DVD or cassette decks in
the same room, or from a remote room when an
IR link is connected to the AVR 7500.
Record/Pause: Press this button to acti-
vate the Record or Pause function on compatible
Harman Kardon CD, DVD or Cassette Deck prod-
ucts.
NOTE: The Zone II remote may be used in either
the same room where the AVR 7500 is located,
or it may be used in a separate room with an
optional infrared sensor that is connected to the
AVR 7500's Multi IR input jack b. When it is
used in the same room as the AVR 7500, it will
control the functions of the AVR 7500 or any
compatible Harman Kardon products in that
room. When it is used in a separate room via a
sensor connected to the Multi IR Jack b, the
buttons for power, input source, volume and
Preset Up/Down – Track Skip: When the
AVR's tuner is selected as the input source, these
buttons will move up or down through the list of
stations that have been stored in the preset
.
memory. When a CD or DVD player is selected,
these buttons activate the forward or reverse
track or chapter skip functions.
Disc Skip: Press this button to change
discs on compatible Harman Kardon CD or DVD
changers.
Volume Up/Down: When used in the
room where the AVR 7500 is located, press this
button to raise or lower the volume in that
room. When it is used in a remote room with a
sensor that is connected to the Multi IR Jack
, this button will raise or lower the volume in
the remote room.
Play Forward/Reverse/Stop: Press these
buttons to control compatible Harman Kardon
CD, DVD or cassette players.
Mute: When used in the room where the
AVR 7500 is located, press this button to tem-
porarily silence the unit. When it is used in a
remote room with a sensor that is connected to
the Multi IR Jack
ly silence the feed to the remote room only.
Press the button again to return to the previous
volume level.
Important Note: No matter in which room the
Zone II remote is used, as with the main remote
it is important to remember to press the Input
Selector button
unit you wish to operate befor you change the
device to be controlled.
mute will control the source and volume for the
second zone, as connected to the Multi Out
Jacks ‚. (See page 39 for complete information
on using the Multiroom system.)
, this button will temporari-
that corresponds to the