Zone Ii Remote Control Functions - Harman Kardon AVR 510 Owner's Manual

Zone II Remote Control Functions

POWER
MUTE
A
OFF
AVR VID 1 VID 2
B
AM/ / FM VID 3 VID 4
C
DVD CD
TAPE
D
DN TUNING
E
F
DN PRESET
G
H
DISC SKIP
DISC SKIP
I
VOLUME
å Power Off
∫ AVR Selector
ç AM/FM Tuner Select
∂ Input Selectors
≠ Tuning Up/Down – Fast Play
ƒ Record/Pause
© Preset/Track Skip
˙ Disc Skip
I Volume Up/Down
∆ Play Forward/Reverse/Stop
˚ Mute
14 ZONE II REMOTE CONTROL FUNCTIONS
å Power Off: When used in the room
where the AVR 510 is located, press this button
to place the unit in Standby. When it is used in
K
a remote room with a sensor that is connected
to the Multi IR jack e, this button turns the
Multiroom system on and off.
∫ AVR Selector: Press this button to turn
on the AVR 510. The input in use when the unit
was last on will be selected.
UP
ç AM/FM Tuner Select: Press this button
UP
to select the Tuner as the input to the
Multiroom system. Press it again to change
between the AM and FM bands.
J
∂ Input Selectors: When the AVR 510 is
off, press one of these buttons to select a spe-
cific input and turn the unit on. When the unit
is already in use, pressing one of these buttons
will change the input.
≠ Tuning Up/Down – Fast Play: When
this remote is used in the same room as the
AVR 510, these buttons may be used to change
the frequency of the tuner. These buttons may
also control the Fast Play or Fast Reverse func-
tions of compatible Harman Kardon CD, DVD or
cassette decks in the same room, or from a
remote room when an IR link is connected to
the AVR 510.
ƒ Record/Pause: Press this button to acti-
vate the Record or Pause function on compati-
ble Harman Kardon CD, DVD or Cassette Deck
products.
NOTE: The Zone II remote may be used in
either the same room where the AVR 510 is
located, or it may be used in a separate room
with an optional infrared sensor that is con-
nected to the AVR 510's Multiroom IR Input
jack e. When it is used in the same room as
the AVR 510, it will control the functions of the
AVR 510 or any compatible Harman Kardon
products in that room. When it is used in a sep-
arate room via a sensor connected to the
Multiroom IR jack e, the buttons for power,
© Preset Up/Down – Track Skip: When
the AVR 510's tuner is selected as the input
source, these buttons will move up or down
through the list of stations that have been
stored in the preset memory. When a CD or
DVD player is selected, these buttons activate
the Forward or Reverse Track or Chapter Skip
functions.
˙ Disc Skip: Press this button to change
discs on compatible Harman Kardon CD or DVD
players.
I Volume Up/Down: When used in the
room where the AVR 510 is located, press this
button to raise or lower the volume in that
room. When it is used in a remote room with a
sensor that is connected to the Multiroom IR
jack e, this button will raise or lower the vol-
ume in the remote room.
∆ Play Forward/Reverse/Stop: Press
these buttons to control compatible
Harman Kardon CD, DVD or cassette players.
˚ Mute: When used in the room where the
AVR 510 is located, press this button to tem-
porarily silence the unit. When it is used in a
remote room with a sensor that is connected to
the Multiroom IR jack e, this button will
temporarily silence the feed to the remote room
only. Press the button again to return to the
previous volume level.
input source, volume and mute will control the
source and volume for the second zone, as con-
nected to the Multiroom Out jacks ‚. (See
page 35 for complete information on using the
Multiroom system.)