American DJ Accu Spot 250 Hybrid User Instructions page 9

Combination lamp & led eleven channel moving head intelligent dmx fixture
Hide thumbs Also See for Accu Spot 250 Hybrid:
Table of Contents

Advertisement

Accu Spot 250 Hybrid
VER (Version) - Displays the software version
ADJU - Fixture code is "C050".
CH01~CH30 for motor calibration.
EDIT MENU -
STEP (S-01 - S-48) - These are the steps slots that you write
your programs into. There are at total of 48 steps. See edit pro-
gram, page 25.
SCXX (SC01 - SC30) - These are the scenes that are stored in
your program. There are a total of 30 scenes.
Submenus:
C-01~C-30 - Edit the channels of each scene.
TIME - Set the Time for each scene.
CEDT - Edit the program via external controller.
REC - This will auto save your custom program.
RUN - This will run your custom program.
American DJ
- www.americandj.com - Accu Spot 250 Hybrid Instruction Manual Page 17
®
System Menu
Accu Spot 250 Hybrid
On-Board System Menu.
easy to navigate system menu. This next section will detail the func-
tions of each command in the system menu.
To access the main menu press the MODE/ESC button (7) on the front
of the unit. Tap the UP (5) or DOWN (6) butons until you reach function
you wish to change. When you reach the function you wish to change
tap the ENTER button. Again, tap the UP or DOWN buttons to change
the function. Once your changes are made, tap the ENTER button to
lock the change in the system, if the ENTER button is not selected
within eight seconds the system will automatically return to menu sec-
tion. To exit without making any changes tap the MODE/ESC button
(4).
ADDR MAIN MENU -
ADDR
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until "ADDR" is displayed, press ENTER.
4. Now the display will show "A001". Adjust the DMX address
by pressing the UP or DOWN buttons.
5. Press ENTER to confirm.
6. Press the MODE/ESC button to return to the main menu.
When the display is on "A001", you can directly press the UP
or DN buttons to change the DMX start address.
TEST MAIN MENU -
TEST
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until "TEST" is displayed, press ENTER.
3. The display will show "T-01". You can now press the up
button and test the different channels.
American DJ
The Accu Spot 250 Hybrid comes with an
DMX Address Setting via control board -
- This will test the functions of each channel.
- www.americandj.com - Accu Spot 250 Hybrid Instruction Manual Page 18
®
System Menu

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents