American DJ Accu Spot 250 Hybrid User Instructions page 10

Accu Spot 250 Hybrid
4. Press MODE/ESC to exit.
PLAY MAIN MENU -
RUN
Run the unit in an Auto mode as a "master" in a
Master/Slave configuration, or as a stand alone unit -
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until "PLAY" is displayed, press ENTER.
3. Tap the UP button until "RUN" is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between "MSTR" or
"ALON", select your choice by pressing ENTER, "PASS" will flash
in the display and fixture will begin its function.
AUDI
Run the unit in Sound Active mode as a "master", or
as a stand alone unit -
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until "PLAY" is displayed, press ENTER.
3. Tap the UP button until "AUDI" is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between "MSTR" or
"ALON", select your choice and press ENTER.
AUTO
This is a precaution mode in case you lose the DMX
signal. The fixtue has 4 modes to choose from, please see
page 14 for a description of the 4 modes -
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until "PLAY" is displayed, press ENTER.
3. Tap the UP button until "AUTO" is displayed, press ENTER.
4. Now you can choose between "CLOSE", "HOLD" "AUTO", or
American DJ - www.americandj.com - Accu Spot 250 Hybrid Instruction Manual Page 19
®
System Menu Accu Spot 250 Hybrid
"AUDI". "HOLD" is the default setting.
5. Select the mode that you want the fixture to run in case of a
lost DMX signal and press ENTER.
LAMP MAIN MENU -
ON/OFF
lamp on and off.
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until "LAMP" is displayed, press ENTER.
3. Press the UP or DOWN buttons to select either "ON" to acti-
vate this function, or "OFF" to deactivate this function.
4. Press ENTER to confirm.
5. Press MODE/ESC to return to the main menu.
RESE MAIN MENU -
ALL
begin the reset motion.
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until "RESE" is displayed, press ENTER.
3. Tap the UP button until "ALL" is displayed.
4. Press ENTER to reset all motors, or press MODE/ESC to
cancel and return to the main menu.
SCAN
will only reset the pan/tilt motor.
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until "RESE" is displayed, press ENTER.
American DJ
- With this function you can manually switch the
- When you activate the reset function, the fixture will
- When you activate this reset function, the fixture
- www.americandj.com - Accu Spot 250 Hybrid Instruction Manual Page 20
®
System Menu