American DJ Accu Spot 250 Hybrid User Instructions page 8

Accu Spot 250 Hybrid
ADDRESS MENU -
AOO1 - A511 (Value) - This is where you set the DMX address of
the unit.
TEST MENU -
T-01 - T-XX (Test) - Tests the functions of each channel. There
are twelve channels. Note: Some channels cannot be tested.
PLAY MENU -
RUN - Runs the unit as a "master" in a Master/Slave configura-
tion or as a Stand Alone unit. The unit will run a internal pro-
gram.
AUDI (Audio) - Runs the unit as a "master" in a Master/Slave
configuration or as a Stand Alone unit in sound active mode.
AUTO - This is a precaution mode in case the DMX signal is lost.
There are four settings to choose from:
• "Hold" - This is the default setting, which in case the signal is
lost the fixture will "hold" at the last setting.
• "Close" - The fixture will return to its "home" standing.
• "Auto" - The fixture will go into Auto mode and run a pre-pro-
grammed show.
• "Audi" - The fixture will go into Sound Active mode.
LAMP MENU -
ON/OFF - Manually switch the lamp "on" and "off".
RESE (RESET) MENU -
ALL - Resets all the motors in the unit.
SCAN - Resets the motors that control pan/tilt.
COLR (Color) - Resets the color motors.
GOBO - Resets the gobo and rotation motors.
American DJ - www.americandj.com - Accu Spot 250 Hybrid Instruction Manual Page 15
®
System Menu Accu Spot 250 Hybrid
SHTR - Resets the shutter/dimmer motors.
TIME MENU -
LIFE - Displays the fixtures total running time.
LAMP - Displays the lamp running time.
CLMP - Clears the lamp running time.
RPAN (REVERSE PAN) MENU -
ON/OFF - When "On" is chosen it will reverse the pan.
RTILT (REVERSE TILT) MENU -
ON/OFF - When "On" is chosen it will reverse the tilt.
MIC MENU -
M-01-M-70 - With this function you can make the internal mic
more or less sensitive to sound.
DISPLAY MENU -
VALU (DMX-512 Value) - Display the DMX-512 value of each
channel.
D ON (Display On) - Turns digital display off after 2 mins.
FLIP - "Flips" the digital display 180º.
SPEC MENU -
LAAU - Automatic lamp start with power.
RDMX - Lets you adjust the DMX address via external controller.
DLOF - Switch lamp on via DMX.
DLAY - Set a delay time for the lamp.
SPOT - This provides a spot beam for lamp optimization.
DFSE (Default Settings) - Resets the unit to the default settings.
FEED - Pan/Tilt feedback (error correction) on/off.
American DJ - www.americandj.com - Accu Spot 250 Hybrid Instruction Manual Page 16
®
System Menu