Uniden HomePatrol?1 Owner's Manual page 41

Volume Offset – Allows you to set a vol
channel that will either reduce (negative values) or
increase the channel's volume relative to other channels.
Set Service Type – Lets you change the service type
assignment for the channel.
Copy Channel – Puts the channel information into the
copy buffer. This can be used to quickly copy channel
settings for an additional channel (after you Copy a
channel, a menu option appears
add channel menu).
Move Chan nel – lets you move a channel to a different
department (more than one departm
the system for this option to operate).
Delete Channel – deletes the current channel from the
Department.
Setting a Department's Location
You can define a departments location using either a
single circle (defined by the centerpoint's latitude and
longitude and the distance from
by using rectangles (each rectangle defined by the
latitude and longitude of opposing corners).
At the Department Menu, select Set Location.
Then, select whether you will use a circle or rectangle(s)
to define the department's location.
ume offset for the
to Paste Channel at the
ent must exist in
the center, or range) or
If you select Circle, tap the existing coordinates.
Then, use the form to enter the latitude and longitude of
the circle's center.
Note: the format used to enter the location is set by the
button in the lower right corner of the screen. In this
example, we show coordinates using DMS format.
Select NEXT, then enter the range for the depar
(the distance from the center of the circle to an
ACCEPT the range to store the setting.
tment
edge).
41 | P a g e