Uniden HomePatrol?1 Owner's Manual page 13

Enter the frequency spacing for the band plan entry.
Then click Accept.
Repeat this for additional table entries.
Entering Site Frequencies
To enter frequencies for the site, select Edit Frequency
from the Site menu.
Then, select Create New Frequency.
Enter the frequency and tap Accept.
The Frequency menu appears.
Edit Frequency – allows you to change the frequency.
Delete Frequency – deletes the frequency from the site.
New Frequency – tap to add additional frequencies, then
repeat the above steps.
Setting a Site's Location
You can define a site's location using either a single circle
(defined by the centerpoint's latitude and longitude and
the distance from the center, or range) or by using
rectangles (each rectangle defined by the latitude and
longitude of opposing corners).
At the Site Menu, select Set Location.
Then, select whether you will use a circle or rectangle(s)
to define the site's location.
13 | P a g e