Speaker Layout - JVC NX-F7 Instructions Manual

NX-F3_NX-F7[A]EN.book Page 7 Tuesday, April 22, 2008 1:55 PM
Preparation (continued)
Using the speakers with commercially available speaker stands
The left and right speakers can be fitted onto commercially available speaker stands. Before fitting the speak-
ers onto commercially available speaker stands, follow the instructions shown below.
Left and right speakers for NX-F7
Detach the original speaker stands.
CAUTION
• The left and right speakers can be installed on a wall.
• When installing the speakers on a wall, be sure to have the speakers installed by qualified personnel.
• DO NOT install the speakers on the wall by yourself to avoid unexpected damage from them falling off the
wall due to incorrect installation or weakness in wall structure.
• Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage
to devices may result if the installed speakers interfere with daily activities.

Speaker layout

This system is designed to provide virtual surround sound by positioning the 3 speakers in front. (The set of
the left and right speakers and the subwoofer refers to 2.1 channel.) The front surround function processes
input signals to create a realistic sound field.
7
Do not connect the power cable until all other connections have been made.
Left and right speakers for NX-F3
Remove the speaker cables from the tabs and
slots on the speakers.
Main unit
Left speaker
Remove the cable from
the shorter tab first.
Bottom view
Subwoofer
Right speaker
Longer tab