Optical Digital Out Signals; Operating Jvc's Tvs Using The Remote Control - JVC UX-G980V Instructions Manual

Optical Digital Out Signals

Playback disc/file
with 48 kHz, 16/20/24 bit Linear PCM
DVD Video
with 96 kHz, Linear PCM
with Dolby Digital
with DTS
with 48 kHz, 16/20/24 bit Linear PCM
DVD-R/-RW
in DVD-VR
with Dolby Digital
format
SVCD/VCD/CD
CD with DTS
MP3/WMA/WAV/MPEG-1/MPEG-2
with MP2, MP3
DivX
with Dolby Digital
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the
OPTICAL DIGITAL OUT terminal if the discs are not copy-protected.

Operating JVC's TVs Using the Remote Control

Remote control
63
DIGITAL AUDIO OUTPUT
DTS bitstream
DTS bitstream
Output Signals
STREAM/PCM DOLBY DIGITAL/PCM
48 kHz, 16 bit Linear PCM*
48 kHz, 16 bit Linear PCM
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM*
Dolby Digital bitstream
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
44.1 kHz, 16 bit Linear PCM
32/44.1/48 kHz, 16 bit Linear PCM
32/44.1/48 kHz, 16 bit Linear PCM
Dolby Digital bitstream
You can use the remote control to operate JVC's TVs.
Change the input mode.
TV/VIDEO
TV CH UP, DOWN Change the channel.
While holding SHIFT, press...
Turn on/off TV.
TV
TV VOL +, – Adjust the TV volume.
PCM ONLY
48 kHz, 16 bit
Linear PCM
48 kHz, 16 bit
Linear PCM
32/44.1/48 kHz,
16 bit Linear PCM