JVC UX-G980V Instructions Manual page 27

For USB mass storage class device connected to the USB
MEMORY 2 terminal:
1
Select "USB MEMORY 2" as the source.
2
Select group/track you want for Program Play using
the number buttons, then press ENTER/SET.
• To select a number, see "How to select a number" on
page 9.
• You can also use 4/¢ buttons to select a group
and a track.
– To select a group: press 4/¢ while holding
SHIFT.
– To select a track: press 4/¢.
3
Repeat step 2 until you complete your program.
4
Activate Program Play.
Canceled
5
Start playback.
Playback starts in the order you have
programmed.
To skip: To pause:
To release, press the
same button again.
To check the programmed contents
Before or after playback...
In the programmed order.
In the reverse order.
• For discs, you can also use ∞ or 5 to check the
programmed contents.
To modify the program
Before or after playback...
To erase the last step:
(while holding...)
To erase the entire program:
(while holding...)
To exit Program Play
Before or after playback...
For disc:
For USB mass storage class device connected to the USB
MEMORY 2 terminal:
Canceled
To stop:
To add another step
in the program:
• For disc, repeat step
3 on page 23.
• For "USB
MEMORY 2,"
repeat step 2 on the
left.
Canceled
24