Optical Digital Out Signals; Operating Jvc's Tvs Using The Remote Control - JVC CA-UXG500V Instructions Manual

Optical Digital Out Signals

Playback disc/file
with 48 kHz, 16/20/24 bit Linear PCM
DVD Video
with 96 kHz, Linear PCM
with Dolby Digital
with DTS
with 48 kHz, 16/20/24 bit Linear PCM
DVD-R/-RW
in DVD-VR
with Dolby Digital
format
SVCD/VCD/CD
CD with DTS
MP3/WMA/WAV/MPEG-1/MPEG-2
DivX with MP2, MP3
with Dolby Digital
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the
OPTICAL DIGITAL OUT terminal if the discs are not copy-protected.

Operating JVC's TVs Using the Remote Control

Remote control
EN37-46_UX-G500V[U]1.indd 44 EN37-46_UX-G500V[U]1.indd 44
DIGITAL AUDIO OUTPUT
STREAM/PCM
DTS bitstream
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
DTS bitstream
You can use the remote control to operate JVC's TVs.
While holding SHIFT, press...
Output Signals
DOLBY DIGITAL/PCM
48 kHz, 16 bit Linear PCM*
48 kHz, 16 bit Linear PCM
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM*
Dolby Digital bitstream
44.1 kHz, 16 bit Linear PCM
32/44.1/48 kHz, 16 bit Linear PCM
32/44.1/48 kHz, 16 bit Linear PCM
Dolby Digital bitstream
Change the input mode.
TV/VIDEO
Change the channel.
TV CH UP, DOWN
Turn on/off TV
TV
TV VOL +, – Adjust the TV volume.
PCM ONLY
48 kHz, 16 bit
Linear PCM
48 kHz, 16 bit
Linear PCM
32/44.1/48 kHz,
16 bit Linear PCM
44
3/11/08 12:58:45 PM 3/11/08 12:58:45 PM