Listening To The Radio - JVC CA-UXG500V Instructions Manual

How to select a number

Listening to the Radio

To select the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other
countries use 10 kHz spacing. Before operating the tuner,
select the appropriate AM tuner interval spacing used for
your area.
1
Select "TUNER AM," then turn off (standby) the
System.
2
Select the AM tuner interval spacing.
To select 9 kHz:
(while holding...)
To select 10 kHz:
(while holding...)
9
EN09-18_UX-G500V[U]1.indd 9 EN09-18_UX-G500V[U]1.indd 9
Examples:
To select number 5, press 5.
To select number 10, press 10.
To select number 15, press 10, 1,
then 5.
To select number 30, press 10, 3,
then 0.
To select number 125, press 10,
10, 1, 2, then 5.
INFO
To select the band (FM or AM)
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
Main Unit
ONLY
When a station (frequency) with sufficient signal strength
is tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To manually stop the search, press either button.
If the FM reception is poor
The M (monaural) indicator lights on the display.
Reception will improve though stereo effect is lost—
Monaural reception.
To restore the stereo effect, press the button again. The
M (monaural) indicator disappears.
To preset the stations
You can preset 30 FM and 15 AM stations.
1
Tune in to a station you want to preset.
• You can also store the monaural reception mode for
FM preset stations if it is selected.
2
Activate the preset number entry mode.
• Finish the following process while the indication on
the display is flashing.
Remote
ONLY
Remote
ONLY
3/11/08 12:57:39 PM 3/11/08 12:57:39 PM