Table of Contents
Advertisement
Figuer 4-3 The Second Attaching-Brackets Method
Figuer 4-4 Attaching Brackets to the Rack
Notice:
Please notice the following points when using the DI-2000 series:
1)
As other electronic devices, Starting and turning off the power fast and frequently does harm to
semiconductor chips; when needing to restart the DI-2000 series of routers, please turn on the
power again after an interval of 3 to 5 seconds from turning off the power.
Please try to use the "reboot" command to restart the routers.
2)
Please don't bump the routers or make the DI-2000 series fall from high. Such operations may
harm the internal hardware of the routers.
3)
Please connect to the DI-2000 series with correct exterior connection ports. Don't plug the
telephone plug(RJ11, a 4-line plug) into the Ethernet TP port or Console port. Ethernet TP jack
can't be plugged into the Console port(RJ45, a 8-line jack). And the Console port cable can't be
plugged into the Ethernet TP port(RJ45, a 8-line jack). The above and other mistaken operations
may harm internal components of the port.
DI-2000 Series Routers hardware installation manual
- 24 -
Advertisement
Table of Contents
