D-Link DI-2000 Series User Manual page 16

2. Extenal connection Specification of Console port
The cable connects the Console port of DI-2004 and external terminal Console devices.
One end is a 8 pin jack, and the other is a 25 aperture connector(DB25) and a 9
aperture connector(DB9). The RJ45 connector is plugged into the Console port of the
router, and among DB25 and DB9, one should be selected according to the
requirement of the terminal serial port. The internal connection of the cable is shown
as the following figure. The serial number of the Console cable is DRC0001.
3. External Connection Specification of AUI and TP interface
AUI port is also called thick Ethernet interface, through which the router can connect to
the thick cable with AUI cable, or connect to the thin cable or TP interface through the
special switch box.
TP port can connect five general types of twisted pair to HUB. Connect as shown
below:
DI-2000 Series Routers hardware installation manual
Figuer 2-5 V.35 MODEM cable
Figuer 2-6 Console Cable Connection
- 13 -