5. Cross Cable Connection Specification for Debugging
(1)
cross cable on the Serial port
Under certain conditions, two serial ports of a DI-2000 series of router needs to
be crossed, or two DI-2000 series of routers connect back on the back according
to the following connection methods.
Select V.28 (RS-232)method on the port as shown below:
V.28 cross cable connection is show as Figure 1-3-5.
Figuer 3-3 Straight RJ45 Line
Figuer 3-4 V.28 Cross Cable Usage
Figuer 3-5
V.28 Cross Cable Connection
DI-2000 Series Routers hardware installation manual
- 20 -